Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 5
Next »
Cylinder heads, installing
The updated procedure found attached here: https://wiki.bentleypublishers.com/download/attachments/25952263/P989_102.p.28-29.correction.pdf describes temporarily installing the camshaft cases prior to tightening down the cylinder head nuts. If the head bolts are tightened without first fitting the cam cases, the cam cases may not perfectly fit alilgnment pins on the cylinder heads. Temporarily installing the camshaft cases insures the cases will fit once the heads bolts are torqued.