Step | Adjust | Additional Information |
|---|
1 | Close trunk lid or liftgate as well as engine hood and
doors | Vehicles with code (491) USA
version or code (494) USA
version |
2 | Turn key in ignition switch to position "1". | |
3 | Press system selection button (S110s3) repeatedly
until the basic display "Kilometer reading" is shown
in the multifunction display (A1p13) | |
4 | Briefly press variable resistor or dimmer (A1r1) 3
time | An acoustic signal can be
heard and the voltage is shown
in the multifunction display
(A1p13). |
5 | Turn key in ignition switch to position "2". | The "Service indicator"
appears in the multifunction
display (A1p13). |
6 | Press lower scroll forward/back button (S110s1) | The "Service indicator"
appears in the multifunction
display (A1p13). |
7 | Briefly press variable resistor or dimmer (A1r1)
once | The menu "Oil type" for
selecting the specification of
the engine oil used appears in
the multifunction display
(A1p13). |
8 | Select the engine oil grade used by pressing the +
and - buttons, setting of specific functions and
volume control (S111s1). | The selection option may vary
depending on the engine:
"Standard", "Qual. 229.3" or
"Qual. 229.5". |
9 | Press upper scroll forward/back button (S110s1) to
confirm | "Confirm oil reset, press R
button for 3 s" appears in the
multifunction display (A1p13). |
10 | Press and hold variable resistor or brightness control
(A1r1) pressed for 3 s | "Service confirmed" appears in
the multifunction display
(A1p13). |
11 | Press upper scroll forward/back button (S110s1) | The "Service indicator"
appears in the multifunction
display (A1p13). |
12 | Press upper system selection button (S110s3) | The multifunction display
(A1p13) then shows the basic
display "Kilometer reading or
temperature display" or the
"speed display". |
13 | Turn key in ignition switch to position "0". | |
