Abstract: This article describes Adjusting Front Wheel Bearing Mercedes-Benz C-Class 1994-2000 (W202) C280
...
_Applies to: Mercedes-Benz C-Class 1994-2000 _Read Cautions and Warnings before beginning any work on your vehicle.
...
| Section |
|---|
| Column |
|---|
|  Image Modified
- Raise car and support safely.
| Warning |
|---|
| Make sure the car is stable and well supported at all times. Use a professional automotive lift or jack stands designed for the purpose. A floor jack is not adequate support. |
* Screw in lug bolt (48a) across from the brake rotor attachment bolt to secure brake rotor. - Press brake pads back into brake caliper.
- Slacken hexagon socket head screw (9i) and lightly tighten clamping nut (9d) whilst rotating the wheel hub. Then turn clamping nut (9d) back until play is noticeable.
- Attach dial gauge (022) to dial gauge holder (015).
- Adjust wheel bearing play by turning the clamping nut (arrow) in stages while pushing and pulling the brake disk firmly back and forth.
- Tighten Allen bolt (9i), check the wheel bearing end float again.
- Remove dial gauge (022) with the dial gauge holder (015.
|
|
...
- Reassemble front wheel. Depress brake pedal several times to seat barke pads.
Model 202 |
|---|
| Wheel bearing play at front axle | mm 0,01-0,02 | Torque | Bolt for clamping nut to adjust front axle wheel bearing play | NM 11 |
|
| Column |
|---|
| | Warning |
|---|
| title | Before Performing any Work |
|---|
| Please read Cautions and Warnings before proceeding with any work on your vehicle |
|
|
