Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Abstract: Resetting Tire Pressure Monitoring System (TPMS).


Applies to: BMW 5 Series: 2004-2009 (E60, E61)


Before Performing any Work

Please read Cautions and Warnings before proceeding with any work on your vehicle

Conditions: Perform initialization after correcting tire pressure, a tire change or a wheel change.

1. Start the engine but do not drive off.

2. Press the rocker switch on the steering column stalk until the "initializing tire failure
indicator" function is shown in the instrument cluster.

3. Confirm the display by briefly pressing the BC button on the steering column stalk.

4. Press and hold the BC button on the steering column stalk for approx. 5 seconds
until the RDW display lights up in the instrument cluster. The tire failure indicator is
now ready for initialization. If no tick is shown in the display, this indicates that the
tyre failure indicator cannot be initialized due to a fault.

5. Release the BC button to conclude initialization.


  • No labels