Abstract: How to retrofit an on-board computer system to non equipped models
Applies to: BMW 3 Series 1999 - 2005 - 6 cylinder models (platform: E46)_
Before Performing any Work
Please read Cautions and Warnings\ before proceeding with any work on your vehicle
this article is in progress. 2011/01/28. not yet intended for use.
On-board computer, retrofit
In this article we will replace the standard (w/o on-board computer) directional stalk and with an On-board computer stalk and then reprogram the instrument cluster using a factory scan tool to access the on board features.
Please refer to the Bentley E46 Service manual for appropriate repair procedures, including all pertinent warnings and cautions.
- remove air bag
Airbags are pyrotechnic explosive devices. Proper removal procedures must be followed when servicing these systems. Use car when working on vehicles fitted with airbags.
* remove steering wheel
- remove clock spring
- remove and replace directional stalk with part #61 31 8 363 668
- reinstall in reverse order
- enter coding program funtion with gt-1. via path zcs coding, retrofit, obc, confirm retrofit kombi
